Merge branches 'clk-phase-errors', 'clk-amlogic', 'clk-renesas' and 'clk-allwinner' into clk-next

 - Don't show clk phase when it is invalid

* clk-phase-errors:
  clk: rockchip: fix mmc get phase
  clk: Fix phase init check
  clk: Bail out when calculating phase fails during clk registration
  clk: Move rate and accuracy recalc to mostly consumer APIs
  clk: Use 'parent' to shorten lines in __clk_core_init()
  clk: Don't cache errors from clk_ops::get_phase()

* clk-amlogic:
  clk: meson: meson8b: set audio output clock hierarchy
  clk: meson: g12a: add support for the SPICC SCLK Source clocks
  dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs
  clk: meson: gxbb: set audio output clock hierarchy
  clk: meson: gxbb: add the gxl internal dac gate
  dt-bindings: clk: meson: add the gxl internal dac gate

* clk-renesas:
  dt-bindings: clock: renesas: cpg-mssr: Convert to json-schema
  clk: renesas: rcar-usb2-clock-sel: Add reset_control
  clk: renesas: rcar-usb2-clock-sel: Add multiple clocks management
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add power-domains and resets properties
  dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix clock[-name]s properties
  clk: renesas: Remove use of ARCH_R8A7795
  clk: renesas: r8a77965: Add RPC clocks
  clk: renesas: r8a7796: Add RPC clocks
  clk: renesas: r8a7795: Add RPC clocks
  clk: renesas: rcar-gen3: Add CCREE clocks

* clk-allwinner:
  clk: sunxi-ng: sun8i-de2: Sort structures
  clk: sunxi-ng: sun8i-de2: Add R40 specific quirks
  clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A83T
  clk: sunxi-ng: sun8i-de2: Don't reuse A83T resets
  clk: sunxi-ng: sun8i-de2: H6 doesn't have rotate core
  clk: sunxi-ng: sun8i-de2: Add rotation core clocks and reset for A64
  clk: sunxi-ng: sun8i-de2: Split out H5 definitions
  clk: sunxi-ng: a64: Export MBUS clock

Author: bebarino

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt

@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Clock Pulse Generator / Module Standby and Software Reset
+
+maintainers:
+  - Geert Uytterhoeven <[email protected]>
+
+description: |
+  On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator)
+  and MSSR (Module Standby and Software Reset) blocks are intimately connected,
+  and share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The MSSR block provides two functions:
+        1. Module Standby, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s9210-cpg-mssr  # RZ/A2
+      - renesas,r8a7743-cpg-mssr  # RZ/G1M
+      - renesas,r8a7744-cpg-mssr  # RZ/G1N
+      - renesas,r8a7745-cpg-mssr  # RZ/G1E
+      - renesas,r8a77470-cpg-mssr # RZ/G1C
+      - renesas,r8a774a1-cpg-mssr # RZ/G2M
+      - renesas,r8a774b1-cpg-mssr # RZ/G2N
+      - renesas,r8a774c0-cpg-mssr # RZ/G2E
+      - renesas,r8a7790-cpg-mssr  # R-Car H2
+      - renesas,r8a7791-cpg-mssr  # R-Car M2-W
+      - renesas,r8a7792-cpg-mssr  # R-Car V2H
+      - renesas,r8a7793-cpg-mssr  # R-Car M2-N
+      - renesas,r8a7794-cpg-mssr  # R-Car E2
+      - renesas,r8a7795-cpg-mssr  # R-Car H3
+      - renesas,r8a7796-cpg-mssr  # R-Car M3-W
+      - renesas,r8a77961-cpg-mssr # R-Car M3-W+
+      - renesas,r8a77965-cpg-mssr # R-Car M3-N
+      - renesas,r8a77970-cpg-mssr # R-Car V3M
+      - renesas,r8a77980-cpg-mssr # R-Car V3H
+      - renesas,r8a77990-cpg-mssr # R-Car E3
+      - renesas,r8a77995-cpg-mssr # R-Car D3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - extal     # All
+        - extalr    # Most R-Car Gen3 and RZ/G2
+        - usb_extal # Most R-Car Gen2 and RZ/G1
+
+  '#clock-cells':
+    description: |
+      - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
+        and a core clock reference, as defined in
+        <dt-bindings/clock/*-cpg-mssr.h>
+      - For module clocks, the two clock specifier cells must be "CPG_MOD" and
+        a module number, as defined in the datasheet.
+    const: 2
+
+  '#power-domain-cells':
+    description:
+      SoC devices that are part of the CPG/MSSR Clock Domain and can be
+      power-managed through Module Standby should refer to the CPG device node
+      in their "power-domains" property, as documented by the generic PM Domain
+      bindings in Documentation/devicetree/bindings/power/power-domain.yaml.
+    const: 0
+
+  '#reset-cells':
+    description:
+      The single reset specifier cell must be the module number, as defined in
+      the datasheet.
+    const: 1
+
+if:
+  not:
+    properties:
+      compatible:
+        items:
+          enum:
+            - renesas,r7s9210-cpg-mssr
+then:
+  required:
+    - '#reset-cells'
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    cpg: clock-controller@e6150000 {
+            compatible = "renesas,r8a7795-cpg-mssr";
+            reg = <0xe6150000 0x1000>;
+            clocks = <&extal_clk>, <&extalr_clk>;
+            clock-names = "extal", "extalr";
+            #clock-cells = <2>;
+            #power-domain-cells = <0>;
+            #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml

@@ -38,18 +38,29 @@ Required properties:
 - reg: offset and length of the USB 2.0 clock selector register block.
 - clocks: A list of phandles and specifier pairs.
 - clock-names: Name of the clocks.
- - The functional clock must be "ehci_ohci"
+ - The functional clock of USB 2.0 host side must be "ehci_ohci"
+ - The functional clock of HS-USB side must be "hs-usb-if"
  - The USB_EXTAL clock pin must be "usb_extal"
  - The USB_XTAL clock pin must be "usb_xtal"
 - #clock-cells: Must be 0
+- power-domains: A phandle and symbolic PM domain specifier.
+                 See power/renesas,rcar-sysc.yaml.
+- resets: A list of phandles and specifier pairs.
+- reset-names: Name of the resets.
+ - The reset of USB 2.0 host side must be "ehci_ohci"
+ - The reset of HS-USB side must be "hs-usb-if"
 
 Example (R-Car H3):
 
 	usb2_clksel: clock-controller@e6590630 {
 		compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
 			     "renesas,rcar-gen3-usb2-clock-sel";
 		reg = <0 0xe6590630 0 0x02>;
-		clocks = <&cpg CPG_MOD 703>, <&usb_extal>, <&usb_xtal>;
-		clock-names = "ehci_ohci", "usb_extal", "usb_xtal";
+		clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+			 <&usb_extal>, <&usb_xtal>;
+		clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
 		#clock-cells = <0>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		resets = <&cpg 703>, <&cpg 704>;
+		reset-names = "ehci_ohci", "hs-usb-if";
 	};