Skip to content

spec get device ethernet ip

Ken Sharp edited this page Dec 10, 2025 · 2 revisions

Get Device Ethernet IP

Get the LINX device's Ethernet IP address.

LabVIEW

Developer Note

N/A

Command Packet

Get Device Ethernet IP
Description Get the LINX device's Ethernet IP address.
Size 7 Bytes
Format 0 1 2 3 4 5 6
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x07 PACKET NUM CMD : 0x0015 CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Packet Size In Bytes
PACKET NUM The Current Packet Number. This value increments with each new packet or repeats for a multi packet command.
CMD Get Device Ethernet IP Command.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

LINX Target

Developer Note

N/A

Response Packet

Get Device Ethernet IP Response
Description LINX device's response to Get Device Ethernet IP Command
Size 10 Bytes
Format 0 1 2 3 4 5 6 7 8 9
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x0A PACKET NUM STATUS IP CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Total packet size in bytes.
PACKET NUM The packet number of the packet that generated the response.
STATUS See Return Status section below.
IP IP Address x.x.x.x
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

Return Status

No function specific statuses. See Return Status for universal return statuses.

Related Links

LINX

Clone this wiki locally