Skip to content

spec spi set cs pin

Ken Sharp edited this page Dec 10, 2025 · 2 revisions

SPI Set CS Pin

This Command Is Obsolete. This Value Should Be Specified As An Input To SPI Write / Read VI.

Set the chip select pin (DO) for the specified SPI Channel.

LabVIEW

Command Packet

SPI Set CS Pin Command
Description Set the chip select pin (DO) for the specified SPI Channel.
Size 9 Bytes
Format 0 1 2 3 4 5 6 7 8
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE PACKET NUM CMD : 0x0106 CHANNEL PIN CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Packet Size In Bytes
PACKET NUM The Current Packet Number. This value increments with each new packet.
CMD SPI Set CS Pin Command.
CHANNEL SPI channel.
PIN DO pin number to use as CS pin for specified SPI channel.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

LINX Target

Response Packet

SPI Set CS Pin Response
Description LINX device's response to SPI Set CS Pin command
Size 6 Bytes
Format 0 1 2 3 4 5
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE PACKET NUM STATUS CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Total packet size in bytes.
PACKET NUM The packet number of the packet that generated the response.
STATUS See Return Status section below.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

Return Status

No function specific statuses. See Return Status for universal return statuses.

Related Links

LINX

Clone this wiki locally