Skip to content

spec get i2c channels

Ken Sharp edited this page Dec 10, 2025 · 2 revisions

Get I2C Channels

Get all valid I2C channel numbers.

LabVIEW

Developer Note

This packet will be used during enumeration to allow the host to do channel range checking.

Command Packet

Get I2C Channels
Description Get all valid I2C channel numbers.
Size 7 Bytes
Format 0 1 2 3 4 5 6
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE : 0x07 PACKET NUM CMD : 0x000E CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Packet Size In Bytes
PACKET NUM The Current Packet Number. This value increments with each new packet.
CMD Flush Command.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

LINX Target

Developer Note

Return all valid I2C channel numbers.

Response Packet

Get I2C Channels Response
Description LINX device's response to Get I2C Channels.
Size Variable
Format 0 1 2 3 4 5 6
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
SoF : 0xFF PACKET SIZE PACKET NUM STATUS ~Channels~ CHECKSUM
SoF Start of Frame. Always 0xFF.
PACKET SIZE Total packet size in bytes.
PACKET NUM The packet number of the packet that generated the response.
STATUS See Return Status section below.
~Channels~ Variable Size. The channel number of each I2C channel.
CHECKSUM Checksum. Computed by adding all of the bytes in the packet in U8 form ignoring rollover.

Return Status

No function specific statuses. See Return Status for universal return statuses.

Related Links

LINX

Clone this wiki locally